Fuses, LEDs and jumpers

Fuses

Source: Fuse List p. 1-47. Always replace with the same rating and type (S.B. = slow blow).

Power driver

FuseCircuitRating
F101Lower left flipper3A S.B.
F102Lower right flipper3A S.B.
F103Solenoids 25–283A S.B.
F104Solenoids 9–163A S.B.
F105Solenoids 1–83A S.B.
F106GI 2, White-Violet5A S.B.
F107GI 3, White-Yellow5A S.B.
F108GI 5, White-Green5A S.B.
F109GI 4, White-Orange5A S.B.
F110GI 1, White-Brown5A S.B.
F111Flasher secondary5A S.B.
F112Solenoid secondary5A S.B.
F113+5V logic5A S.B.
F114+18V lamp matrix8A N.B.
F115+12V switch matrix3/4A S.B.
F116+12V secondary3A S.B.

Audio

FuseCircuitRating
F501−25V circuit3A S.B.
F502+25V circuit3A S.B.

Dot matrix controller

FuseCircuitRating
F601+80V A.C.3/8A S.B.
F602+100V A.C.3/8A S.B.

Extra flipper supply

FuseCircuitRating
F901Upper left flipper3A S.B.
F902Upper right flipper3A S.B.

Line filter

FuseCircuitRating
—Domestic game8A N.B.
—Foreign game4A S.B.

Under the playfield

FuseCircuitRating
—Magnets5A S.B.

Diagnostic LEDs

Source: LED List p. 1-46. Blink codes for the CPU LED are in the handbook's Error messages and codes.

LEDWhatNormal
CPU D19BlankingOn at power-up, off in operation
CPU D20DiagnosticOff at power-up, blinks in operation
CPU D21+5 VDCOn
PD LED 1+12 VDC, switch circuitNormally on
PD LED 2High/low line-voltage sensorNormally on
PD LED 3High/low line-voltage sensorNormally off
PD LED 4+5 VDC, digital circuitNormally on
PD LED 5+20 VDC, flasher circuitNormally on
PD LED 6+18 VDC, lamp circuitNormally on
PD LED 7+12 VDC, power circuit (motors, relays)Normally on

Jumper charts

Transcribed on the quick-reference page; the manual page is Operations Manual PDF page 2.