Thing Eject Hole
Flasher ·
Wiring
- Wire
- Blue-Red J122-2 · Q24
- Fuse
- F103 (3A S.B.) (derived from the fuse list, not printed per coil)
Parts
- Coil AE-30-2000
- Assembly A-15368
Location
Related
Service log
Everything you record stays on this device.
Service notes: Measure across the two lugs, game off: about 41 Ω (forum). Near 0 Ω is a shorted coil that blows fuse F103 (3A S.B.); open is a dead coil. Then the diode across the lugs, the driver transistor Q24 on the driver board, and the connector pin J122-2. A coil that locks on is the transistor, not the coil. Never oil the plunger or the sleeve. Its flyback diode is tied back to the driver board through J122 in a shared pair; a lost tieback destroys the transistor, so check both J122 tieback groups after any work under the playfield. A2 Coils, magnets and motors
Appendices:A2 Coils, magnets and motorsA5 Power driver boardA1 Multimeter basics